Publicidad
3. Remove the middle cable gland (A) at the bottom
of the enclosure.
A
5. Assemble the cable gland and loosen the external
nut (A).
6. Install the cable gland at the bottom of the
enclolsure and fasten the nut (B), afterwards fasten
the nut (A).
B
A
8
CN310 Pin
Name
1
RS485A-1
2
RS485B-1
3
RS485A-2
4
RS485B-2
4. Remove the external nut (A), then remove the
blocking rubber (B). Next, insert the ethernet cable
into the hole (C). Repeat the similar step for the
RS485 cable installation.
7. Put the RJ45 plug of the Ethernet cable in the
Ethernet RJ45 socket (A). Put the RS485 cable
in the RS485 socket (B).
A
Description
For communicati o n with an energy
meter
For communication with an energy
meter
A
B
B
A
C
ENGLISH
Publicidad
