• OPEN WINDOWS function
This option allows you to activate or deactivate the WINDOWS OPEN function.
Using the and buttons
Once the desired option has been selected, press
This function is activated when there is a drop of at least 4°C in the room
temperature within 30 minutes. This normally occurs when a window is left open,
allowing warm air to escape and wasting energy. If this occurs, your product will
automatically activate the Anti-freeze mode for 2 hours. To deactivate this function,
press the on/off button.
• Energy Consumption status
To check the current consumption status of your product, ensure the
'Energy' sub-menu and press the
The display panel will then show a status according to the current state of consumption of the
product:
CONSUMPTION
OK
Up to 40%
effective power
• Effective Power function
To check the Power status of your product, make sure the
icon is flashing in the 'Energy' submenu and press the
to access. This option shows on the display the actual
consumption time of the product and the total time during which
our product is connected to the mains. After a few seconds
without pressing any button, the display will show the nominal
power and the effective power of the product. The effective
power corresponds to the average power value that our product
actually consumes during operation.
and
, select ON to activate and OFF to deactivate.
button to access.
CONSUMPTION
CAUTION
40% - 60%
effective power
KYROS SHORT DIGITAL RADIATOR
to confirm and exit.
button
EN
icon is highlighted in the
CONSUMPTION
WARNING
More than 60%
effective power
17