Sungrow AC011E-01 Guía De Instalación Rápida página 14

④ Connect the cable.
RJ45 terminal components
Note: Crimp the blue wire and the blue-white wire to the crystal head.The blue line (PIN4) connects to 485B, and the
blue-white line (PIN5) connects to 485A.
Wall-mounted charger installation/
Installation des wandmontierten Ladegeräts/
Montage d'un chargeur mural/
Instalación del cargador montado en la pared/
Installazione a parete del caricabatterie/
Montaż ładowarki naściennej/
Instalação do carregador montado na parede/
Installatie van de wandlader/
Installation av väggmonterad laddare/
Seinälle asennettavan latauslaitteen asennus
Before drilling, avoid the water and electricity wiring in the wall to prevent hazards. The drill size isΦ6mm and the drilling depth
is about 45mm.The bearing capacity of the installation carrier shall be at least 4.5 times that of the charger!
4
M5
3+0.2N•m
⑤ Install the back cover.
5
Connect to an inverter or other communication device.
M3
0.5+0.1N•m