Publicidad
Idiomas disponibles
Idiomas disponibles
Avoid the product to have contact
with splashed and dripping water and
corrosive liquids . Never operate the
product near water . In particular, the
product should never be submerged
in liquid . Also, ensure that the product
is not exposed to any shocks or
vibrations . No foreign objects shall
penetrate the product . Risk of product
damage .
Avoid hefty knocks or dropping the
product .
Protect the product from being wet
and from direct sunlight .
Do not expose the product to
any extremes of temperature or
temperature fluctuations . Examples:
Do not leave the product in a car for
extended periods . After exposure to
large temperature fluctuations, allow
the product to acclimatise before
using it again . The precision of the
measuring results can be adversely
affected by extreme temperatures or
temperature fluctuations .
m
WARNING! If smoke is produced,
or if there are any unusual sounds or
smells, stop measuring immediately .
The product should not be used
anymore until it has been inspected by
authorised service personnel . Never
inhale smoke from a burning electrical
product . If you have inhaled smoke,
consult a doctor . The inhalation of
smoke can be harmful .
62 GB/MT
The test probes shall only be
handled behind the finger protection .
Otherwise there is a risk of electric
shock when measuring!
If the product or the test probes are
damaged (including test lead), they
must not be used . Risk of electric
shock!
Pay particular attention to your safety
when dealing with AC voltages over
30 V or DC voltages over 60 V . Risk
of electric shock!
Never operate the product when the
housing is open . Risk of electric shock!
Do not touch the test probes and
the jacks to be measured during a
measurement . Risk of electric shock!
Do not use the product in wet or damp
environments . Ensure that your hands
and shoes are dry . Otherwise there is
a risk of electric shock!
Do not use the product in the vicinity
of explosive gases or vapours or in a
dusty environment . Risk of explosion!
Ensure that no fire sources (e .g . during
candles) are placed on or near the
product . Risk of fire hazard!
Do not exceed the specified
overvoltage category CAT III . Risk of
product damage .
Publicidad
