Publicidad
Idiomas disponibles
Idiomas disponibles
be planned along the wall, and then cleaning will be
conducted back and forth in a "bow" shape to complete
the cleaning of each zone one by one.
•
If the battery level is too low, the cleaning cannot
be started. Please charge first and then start the
cleaning.
•
Before cleaning, all wires on the floor should be
organized to avoid power interruption or damage to
items caused by wire pulling during cleaning.
•
In automatic cleaning mode, if the cleaning area is
less than 108 square feet (10 square meters), it will
be cleaned twice by default.
•
Do not move the charging dock or dust collection
dock during cleaning, and make sure that the
charging dock or the dust collection dock is
energized, otherwise the vacuum cleaner may not
be able to return for recharge.
Pause
During the operation of the vacuum cleaner, press any
button to pause the operation.
Sleep
If it is inactive for 10 minutes, the vacuum cleaner will
automatically switch to the sleep mode.
The vacuum cleaner will automatically switch to the
sleep mode 10 minutes after fully charged.
6.2
CHARGING THE VACUUM
CLEANER
•
Automatic recharge: After the cleaning task is
completed, it will automatically return for recharge.
•
Manual recharge:
a. When paused, press the button
recharge;
b. When the vacuum cleaner is stuck or cannot
find the charging dock, please manually put the
vacuum cleaner back on the dust collection dock for
charging.
English
6.3
In standby mode, press and hold the button
seconds to reset the system.
After resetting the system, the vacuum cleaner will lose
the map and the original settings including the virtual
borders.
6.4
A. Real-time drawing of room map
Real-time drawing of a room map can help you easily
understand the cleaning path and environment. After
cleaning, a map of the room will be generated. The
map will be updated in real time during each cleaning to
ensure normal navigation.
Generate a complete room map:
1. Open the door so that the vacuum cleaner
generates a map of each room;
2. Remove any objects that may block or jam the
vacuum cleaner;
3. After the map is generated, please do not move the
charging base or disconnect the power supply.
B. Repositioning and regeneration of a map
When the position of the vacuum cleaner is moved
or the surrounding environment changes significantly,
the vacuum cleaner will try to reposition and
may regenerate a map to match the surrounding
environment. The details are as follows:
1. If the repositioning is successful, the vacuum
cleaner will resume cleaning;
2. If the repositioning fails, the vacuum cleaner will
regenerate a map to ensure normal navigation for
cleaning.
•
Make sure that the vacuum cleaner starts cleaning
every time from the charging dock.
•
During cleaning, do not move the vacuum cleaner
frequently. If it is moved, place the vacuum cleaner
back in its original position.
6.5
Suction level selection (It is only supported with the
mobile App)
The cleaning intensity level can be selected according
for automatic
to the needs in the APP:
•
Quiet
•
Standard
•
Powerful
•
Super
Fixed-point cleaning
13
RESET THE SYSTEM
MAP MANAGEMENT
NOTE
CHOOSE THE CLEANING MODE
EN
for 15
Publicidad
