Descargar Imprimir esta página

GreenWorks GRV-3011 Manual Del Operador página 19

Robot aspirador
Ocultar thumbs Ver también para GRV-3011:

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
9
VOICE PROMPTS
When the machine fails, the red indicator on the machine will blink and relevant voice prompts will be heard. Follow
the voice prompts to resolve your problem.
Voice Prompts
Error 1: Battery abnormal.
Please consult the instruc-
tions or APP.
Error 2: Wheel module ab-
normal. Please consult the
instructions or APP.
Error 3: Side brush module
abnormal. Please consult
the instructions or APP.
Error 4: Fan abnormal.
Please consult the instruc-
tions or APP.
Error 5: Rolling brush ab-
normal. Please consult the
instructions or APP.
Error 7: Laser sensor ab-
normal. Please consult the
instructions or APP.
Error 9: The charging is ab-
normal. Please clean the
charging contact area.
Error 10: The machine
is abnormal. Please shut
down and restart.
Error 12: The operation
is abnormal. Please check
whether the rocker switch is
turned on.
English
Please open the battery compartment, check whether the battery is properly con-
nected, and try to restart the machine.
The battery temperature is too high or too low. Please wait for the battery tempera-
ture to be normal (2°~104°F) before use.
Please check whether any foreign matter is stuck in a wheel and try to restart the
machine.
Please check whether any foreign matter is stuck in a side brush and try to restart
the machine.
Please check whether any foreign matter is stuck in the fan and try to restart the
machine.
Please clean the dust box and filters and try to restart the machine.
Please remove and clean it, its connections, its cover and the suction inlet. Please
try to restart the machine after cleaning.
Please check the laser sensor for foreign matter and try to restart the machine
after cleaning.
Please check whether the charging area is contaminated, and clean the charging
pole pieces.
Please check whether the battery is installed correctly.
Please toggle the main switch to O first, then to I, and restart.
Please turn on the main switch before operation.
Solution
18

Publicidad

loading