Publicidad
Idiomas disponibles
Idiomas disponibles
use. Always use the correct charger and
refer to the manufacturer's instructions
or equipment manual for proper charging
instructions.
o) Do not leave battery pack on prolonged
charge when not in use.
p) After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
q) Battery pack gives its best performance
when it is operated at normal room
temperature 68 °F ± 40 °F (20 °C ± 5 °C).
r)
When disposing of battery packs, keep
battery packs of different electrochemical
systems separate from each other.
s)
Recharge only with the charger specified by
WorxNITRO. Do not use any charger other
than that specifically provided for use with
the equipment. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
t)
Retain the original product literature for
future reference.
u) Use only the battery pack in the application
for which it was intended.
v) Remove the battery pack from the
equipment when not in use.
w) Dispose of properly.
SYMBOLS
6
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Wear protective gloves
20V Sliding Compound Miter Saw
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not dispose
of waste batteries as unsorted municipal
waste.
Do not burn
Li-Ion battery, battery must be
recycled
Li-I on
Make sure the battery is removed prior
to changing accessories or making any
adjustments to the tool.
Wood
TCT blade
Incorrect
Correct
Lock
Unlock
POSITEC Inc. has established a partnership with the
RBRC Corporation to recycle any Positec batteries
with the RBRC-call2recycle seal. For environmental
protection, please do not discard batteries in the
trash. After the batteries' life cycle is ended, then
please call 1-800-822-8837 for a free service that will
properly dispose of the battery.
EN
Publicidad
