Publicidad
English
Introduction
The Smart Vibration Sensor detects vibration in real time.
When vibration, tilt or drop is detected, vibration sensor
will trigger the gateway to sound an alarm (if siren is there)
and send a notification to your smartphone.
Requirement to use
1. WOOX Home app
2. Smart Zigbee Gateway (not included)
Installation
1. Make sure Smart Vibration Sensor is in the range of
Zigbee gateway's signal.
2. Pull the insulation sheet from battery compartment of the
Smart Vibration Sensor before connecting to gateway.
3. You can put the Smart Vibration Sensor at anywhere or
attach it with provided doublesided mounting tape.
Set up the R7081 with WOOX app
1. Download and install the app "WOOX Home" from Apple
App Store or Google Play Store on your mobile device.
2. Launch the app "WOOX Home".
3. Create a new account or log in to your existing account.
4. Tap "+" to add the device.
5. Select the applicable product type from the list of products..
6. Select a Zigbee Gateway.
7. Ensure the indicator light of Smart Vibration Sensor is
flashing. If the indicator light isn't flashing: press and hold the
reset button for 5 seconds until the blue indicator light starts
to flash.
8. Press confirm button in the Woox home app.
9. The app will now search for the device and register it to
your account.
10. Enter the device name.
2
Publicidad
