Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1. INTRODUCTION
To get the most out of your new circular saw, please read through these instructions and the enclo-
sed safety instructions before use. We also recommend that you save the instructions in case you
need to refer to them at a later date.
2. TECHNICAL SPECIFICATIONS
Voltage/frequency
Power
No load speed
Max. cutting depth at 90°
Max. cutting depth at 45°
Spindle diameter
Cutting disc
Noise Emission Value
(LpA,LpCpeak and LwA)
Respective Uncertainty K
(KpA,KpCpeak and KwA)
Vibration Total Value
3. MAIN COMPONENTS
01. Handle
02. On/off switch
03. Blade
04. Bevel adjustment knob with angle gauge
05. Attachment for side guide
06. Side guide
07. Attachment for blade guard
08. Blade guard
09. Blade cover
10. Lock bolt
4. SPECIAL SAFETY INSTRUCTIONS
Check that the ventilation slots are not blocked.
Always hold the saw with both hands during use. and never use it while standing on a ladder. Always
stand on an approved working platform when sawing objects at a great height.
Never stop the saw blade by applying pressure to the saw or to the side of the blade.
Never use high-speed steel blades.
Never use abrasive discs or cutting discs. Always use the correct type of saw blade for the job.
Never use blades that are bent or have teeth missing.
Never use oversized blades.
Check that the orientation of the blade matches the rotation direction of the motor. The blades teeth
DACS1500
110-240V - 50/60 Hz
1500 W
4700 rpm
65 mm
45 mm
20 mm
185 mm
LpA 93 dB (A)
LwA 104 dB (A)
K
A 3 dB (A)
p
K
A 3 dB (A)
w
ah: 4.26 m/s ²
K: 1.5 m/s ²
2
DACS1800
110-240V - 50/60 Hz
1800 W
4500 rpm
70 mm
48 mm
20 mm
210 mm
LpA 96.35 dB (A), K= 3 dB (A)
LwA 107.35 dB (A), K= 3 dB (A)
ah: 2.1 m/s ²
K: 1.5 m/s ²
Publicidad
