Beautiful 19285 Manual De Instrucciones página 15

5. To assemble for grinding or whipping, using
the blade's collar to handle, place the grinding
(flat) blade into the small cup. (Figure 4)
IMPORTANT: Check to make sure the cup ring is not
attached to the blending cup before assembling the
blade. If it is, simply lift off to remove.
IMPORTANT: In the base of each blade's collar,
there is a plastic gasket seal that creates
an airtight fit with the cups. After dishwashing
and before each use, always check to make sure
the gasket is properly in place, as the heat
from some dishwashers may cause the gasket to
become loose.
WARNING: Never operate the blender when the cup
is empty.
WARNING: Never overfill the cup. Do not exceed
the MAX line.
6. Hold the cup firmly in one hand. Use the other
hand to tighten the cup/blade assembly by turning
the blade collar clockwise until snug.
7. Plug the power cord into a 120V AC electrical outlet.
8. Invert the processing cup/blade assembly. Insert the blade collar into
the motor base, fitting the tabs into the slots on the motor base.
NOTE: The blender will not operate unless the 3 locking tabs on the
processing cup are properly fitted into the 3 slots on the motor base.
19285, 19286, 19287 19288 19289 BTFL Rocket Blender IM R5.indd 13 19285, 19286, 19287 19288 19289 BTFL Rocket Blender IM R5.indd 13
Figure 4
13
2022-11-14 1:15 PM 2022-11-14 1:15 PM