Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Cleaning Instructions
CAUTION: Never immerse the motor base, plug
or cord in water or any other liquid.
1. Always unplug the Rocket Blender
before cleaning.
2. Whenever possible, rinse parts
immediately after processing to make
cleanup easier.
3. Always handle blades using the blade
collar.
CAUTION: Use extreme care when
handling blades. Do not touch the
blades with your fingers. The blades
are very sharp and can cause injury if touched.
4. If necessary, use any small nylon bristle brush to remove processed food
from the blade and the blade area.
5. For quick clean-ups, fill processing cup (blending or grinding) one-
quarter full with clean, warm water. Following the steps outlined in the
Operating Instructions. Rinse thoroughly.
6. Remove cup rings after use to clean. Wash all lids and cup rings in warm
soapy water. Rinse and dry thoroughly.
CAUTION: Never use rough scouring pads or abrasive cleansers on any
plastic or metal parts as the surface may be damaged.
7. Processing blades, processing cups and lids are all top-rack dishwasher
safe.
IMPORTANT: After dishwashing, always check to make sure the gasket seal
in the base of the blade collar is properly in place, as the heat from
some dishwashers may cause them to become loose.
8. The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.
19285, 19286, 19287 19288 19289 BTFL Rocket Blender IM R5.indd 16
19285, 19286, 19287 19288 19289 BTFL Rocket Blender IM R5.indd 16
Figure 6
Gasket ring
Flat side needs to face the bottom
16
2022-11-14 1:15 PM
2022-11-14 1:15 PM
Publicidad
