De Dietrich DMG2508B Guia De Instalacion página 476

3
● Installation Instructions
B� Install the Oven
ADJUST SCREW A
1. Fix ADJSUTSCREW A on the UPPER AIR TUNNEL of the oven, and then
install the oven into the cabinet.
z Adjust the height of ADJUST SCREW A to keep 1mm gap between the
ADJUST SCREW A and the top plane of cabinet.
z Do not trap or kink the power cord.
z Make sure that the oven is installed in the center of the cabinet.
SCREW B INSTALLATION HOLE
2. Open the door; fix the oven to the cabinet with SCREW B at the
INSTALLATION HOLE of TRIM KIT. Then fix the TRIM-KIT PLASTIC COVER
to the INSTALLATION HOLE.
UPPER AIR TUNNEL
TRIM-KIT
EN-19
ADJUST HEIGHT
TRIM-KIT PLASTIC COVER INSTALLATION HOLE
ADJUST SCREW A
TRIM KIT