Commercial Cool CCF43P40 Manual Del Usuario página 11

SET UP & USE
5. Choose a MOUNTING OPTION (Shown on page 13):
FLUSH INSTALLATION OPTION
If installing flush, remove the screws from the canopy and reinstall 3 screws to attach
the canopy to the motor housing as shown.
Screws
Complete the wiring as shown on page 14. It will require two people to complete this
installation. Someone will need to hold the canopy and motor housing, while the wires
are being connected.
Proceed to secure the fan to the ceiling as shown on page 15, step 10.
NORMAL DOWNROD OPTION
6. Remove clamp pin (1) and cross pin (2) from
downrod (3). Proceed to DOWNROD
INSTALLATION on the next page.
Motor
Housing
1
ENGLISH
Canopy
3
2
Page 11