Descargar Imprimir esta página
FoodSaver FM2000 Serie Guia De Inicio Rapido

FoodSaver FM2000 Serie Guia De Inicio Rapido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

FM2000 SERIES QUICK START GUIDE
MAKE A FOODSAVER
1. Using scissors, cut
enough bag material
from roll to hold item,
plus 3 inches (7.62 cm).
Be sure to cut straight.
2. Move Easy Lock Latch to
the Open position. Open
appliance lid. Insert one
end of bag material
across Sealing Strip.
3. Close lid and turn Easy
Lock Latch to Operate
position.
4. Press Seal Button.
5. When Seal Indicator
Light turns off, sealing
is complete. Turn latch
to Open position, lift lid
and remove bag.
VACUUM SEAL FOODSAVER
ZIPPER BAGS:
(sold separately)
1. Prepare zipper bags
according to FoodSaver
Accessory Guidelines,
which are included with
accessory purchases. For
zipper bags, make sure
not to put any food under
the valve and press zipper
closed with finger while bag is lying down on a flat
surface.
2. Turn Latch to Operate position.
3. Insert one end of the Accessory Hose into Accessory
Port on Appliance until it clicks into place. Place
Handheld Sealer on zipper bag valve.
4. Press Vacuum & Seal Button.
Zipper bags are safe for pantry and fridge use only.
p. 1
FM2000_22EFSQSG1 (digital).indd 1
FM2000_22EFSQSG1 (digital).indd 1
HOW TO:
BAG:
®
Place Bag on Sealing Strip
Operate
Store
Open
Close and turn Easy Lock latch to
Operate position
Press Seal Button
®
®
VACUUM SEAL A FOODSAVER
1. Place item(s) in bag,
allowing at least 3 inches
(7.62 cm) of space between
bag contents and top of
bag.
2. Open Appliance Lid and
place open end of bag into
Vacuum Channel
(Drip Tray).
3. Close lid and turn Easy
Lock Latch to Operate
position.
4. Press Vacuum & Seal
Button to begin vacuum
and sealing process. Motor
will continue to run until
bag is fully vacuumed, then
will automatically seal.
5. When Seal Indicator Light
turns off, turn Latch to
Open position, lift lid and
remove bag.
Refrigerate, freeze or store
as needed.
VACUUM SEAL FOODSAVER
CONTAINERS:
(sold separately)
1. Prepare FoodSaver
Preserve &
®
Marinate Container according to
Guidelines, which are included with
container purchase.
2. Turn Latch to Operate position.
3. Insert one end of Accessory Hose
into Accessory Port on Appliance.
Place Handheld Sealer on container
valve.
4. Press Vacuum & Seal Button.
To release vacuum and open, turn knob on lid to Open.
See Owner's Manual for full instructions and safeguards.
Français
Español
p. 2
p. 3
BAG:
®
Place Bag in Vacuum Channel
Operate
Store
Open
Close and Latch Lid
Press Vacuum & Seal Button
®
2022/3/14 上午9:00
2022/3/14 上午9:00

Publicidad

loading

Resumen de contenidos para FoodSaver FM2000 Serie

  • Página 1 Español FM2000 SERIES QUICK START GUIDE p. 2 p. 3 HOW TO: MAKE A FOODSAVER BAG: VACUUM SEAL A FOODSAVER BAG: ® ® 1. Using scissors, cut 1. Place item(s) in bag, enough bag material allowing at least 3 inches from roll to hold item, (7.62 cm) of space between...
  • Página 2 English Español GUIDE DE DÉMARRAGE RAPIDE SERIES FM2000 p. 1 p. 3 COMMENT… FAIRE UN SAC FOODSAVER METTRE UN SAC FOODSAVER SOUS VIDE : 1. À l’aide de ciseaux, couper suffisamment 1. Placer le ou les articles de matériau de sac...
  • Página 3 English Français GUÍA DE INICIO RÁPIDO DE LA SERIE FM2000 p. 1 p. 2 CÓMO HACER UNA BOLSA FOODSAVER SELLAR AL VACÍO UNA BOLSA ® FOODSAVER ® 1. Usando unas tijeras, corte suficiente material 1. Coloque los artículos en la...