Jocel JAT007438 Manual De Instrucciones página 50

PROBLEMS CHECK LIST __________________________________________
PROBLEM
Pilot will not light
Pilot will not stay on
Burner will not light
If the appliance is in case of any defaults or problems of assembly or use, please don't try to modify
it by yourself, contact your supplier or distributor to solve it.
PROBABLE CAUSE
•
Gas valve may be OFF
•
Gas cylinder empty
•
Opening blocked
•
Air in supply system
•
Loose connections
•
Debris around pilot
•
Loose connections
•
Thermocouple bad
•
Gas leak in line
•
Lack of fuel pressure
•
Pressure is low
•
Opening blocked
•
Control not ON
•
Thermocouple bad
•
Pilot light assembly bent
•
Not in correct location
SOLUTION
•
Turn the gas valve ON
•
Refill the gas cylinder
•
Clean or replace opening
•
Purge air from lines
•
Check all fittings
•
Clean dirty área
•
Tighten connections
•
Replace thermocouple
•
Check connections
•
Cylinder is near empty. Refill
the gas cylinder.
•
Cylinder near empty. Refill
gas cylinder.
•
Remove and clean
•
Turn valve to ON
•
Replace thermocouple
•
Place pilot properly
•
Position properly and retry
50