Fracarro HEAD LINE SIG7900 Instrucciones De Uso página 16

Once the modules have been installed they can be identifi ed using the labels supplied. Inside the
rack box there are two sheets with a list of numbers 1 to 11 to number the modules and another
two sheets with numbers 2 to 69 to indicate the output channel of the modulator.
The stickers with "MODULE NUMBER" identify the module position within the row. Stick the label
with the number "1" to the fi rst module after the interconnection module, the label with the num-
ber "2" to the second module and so on up to the 11th possible module. Stick the label to the
top right of the front cover. The address of the module is now easily identifi able by looking at the
display of the row and adding the number of the label (see fi g. 14).
Fig. 14
1
Rotate the handles (extracting tools) by 90° to make one
handle (see fi g. 11).
Fig. 11
Pull the handle gently with one hand to take the module
out. Once the module has been detached from the back
panel it can be removed smoothly using little force (see
fi g. 12).
Fig. 12
When extracting the module be careful not to touch it
as it may cause harm (see Fig. 13).
Fig. 13
IDENTIFYING THE MODULE
2 3
4
5 6
7
16
8 9 11
10