TaoTronics TT-DL029 Guia Del Usuario página 4

EN
Specifications
Model
Light Source
Operate Voltage
USB Output
Power
Color Temperature
Lumens
CRI
How to Use
Use the included power adapter to connect to a power source, the lamp is now in standby mode
and the Power Button indicator will light up.
Power On / Off the Main Light
• In standby mode, tap the Power Button once to turn on the main light. All the button indicators
will light up.
• Tap again to turn off the main light, only the power indicator will remain on.
Adjust the Color Temperature
• The lamp will enter warm light mode by default when turned on. Tap the Mode Button to cycle
through 5 color temperature modes.
Adjust the Brightness
• The lamp will enter the 3rd level brightness by default when turned on. Slide across the Brightness
Slider to adjust the light brightness, the brightness indicator will light up accordingly.
TT-DL029
LED
DC 10V / 1.2A
DC 5V / 1.0A
12W
2700 - 6500K
442 lm
≥80
Set the Timer
• Tap the Timer Button once to set one hour timer for the main light and night light, the timer
indicator will blink to start the countdown. Tap again to exit the timer.
Night Light
• Tap the Night Light Button to activate the night light, the main light will turn off. All button
indicators (except the night light and power indicator) will turn off.
• Tap one more time to turn off the night light.
Memory Function
• With power connected, the lamp will resume the color temperature and brightness of the last use
when turned on.
Note: We suggest you set to a low brightness level before turning the lamp off to prevent glares
when you turn the light on again.
Caution
• Please hold the lamp parts accordingly when adjusting the angle of the lamp head and arm.
• Please adjust the lamp within the allowed angle. Do not use excessive force to avoid damages
to the product.
01/02