Panamax FURMAN BlueBOLT-CV1 Manual Del Propietário página 2

INSTALLATION (STEP 1 OF 2)
It is recommended that you read the entire list of instructions before
proceeding.
1) If an RS-232 card is currently installed in the Power Management
Component, remove the card using the knurled thumbscrews. Note:
minimal torque should be applied in removal of the existing card. If
your Power Management component already has the BlueBOLT-
CV1 card installed, you may skip to step 5.
2) Remove BlueBOLT-CV1 card from protective packaging.
3) ATTENTION: PLEASE RETAIN MAC ADDRESS IDENTIFICATION
NUMBER AND CHALLENGE KEY, WHICH APPEARS ON THE
PROTECTIVE PACKAGING. This is unique to every BlueBOLT-
CV1 card and will be required for registration.
4) Noting the 2 guiding channels within the card slot, gently slide the
BlueBOLT-CV1 card into the card slot, making sure to tighten the
knurled thumbscrews for a snug and secure fit.
5) Connect an Ethernet cable (sold separately) between the
BlueBOLT-CV1 card and an Internet router or modem with an
established Internet connection.
ONLINE REGISTRATION (STEP 2 OF 2)
Your BlueBOLT™ enabled Power Management Component is
completely plug-and-play and does not require any software
installation. The BlueBOLT™ control interface is operated through
your web browser.
1) Using any Internet connected computer, go to www.mybluebolt.com
using your standard Internet browser.
2) Follow the on screen instructions to create an account and/or take
control of your BlueBOLT™ enabled product. Note: you will
need the BlueBOLT-CV1's unique MAC address and challenge key
(provided on the card's protective packaging as well as on the label
of the card itself) in order to register the unit online.
2