Guardian Extra Indoor Pet Barrier Guía De Uso página 10

Important: Do not perform set up procedures while the Receiver
Collar is on your pet.
1. Gather the Receiver Collar(s) you wish to synchronize with the Barrier
Transmitter. Turn the Receiver Collar(s) ON ( | ) and place near the
Barrier Transmitter.
2. Begin with the Barrier Transmitter turned OFF. Press and hold the
DOWN (-) arrow button until a vertical bar appears in the LCD display
window (continue to press and hold the DOWN (-) arrow button
through the end of Step 3b). This bar will indicate the mode the Barrier
Transmitter is currently set at. Unless you choose to change the mode, the
Receiver Collar will be programmed to the mode setting on the Barrier
Transmitter.
3. To change the mode setting, continue to hold the DOWN (-) arrow button
and press and release the UP (+) arrow button. Each time you press and
release the UP (+) arrow button you will notice the vertical bar will move
from mode A to mode B and to mode AB.
a. To program the Barrier Transmitter and Receiver Collar to either
mode A or mode B:
i. Continue to hold the DOWN (-) arrow button and press and
release the UP (+) arrow button to select the desired mode.
10 1-800-732-2677 (US) • 1-800-457-3911 (Canada)
All manuals and user guides at all-guides.com