Guardian Extra Indoor Pet Barrier Guía De Uso página 11

ii. Once you have selected the desired mode, press and hold the UP
(+) arrow button until one bar segment appears followed by three
tones from the Receiver Collar(s). The Receiver Collar(s) is now
set for your chosen mode.
b. To program the Barrier Transmitter to mode AB:
i. Continue to hold the DOWN (-) arrow button and press and
release the UP (+) arrow button until there are two vertical bars
in the display window.
ii. Release your fi ngers from the buttons – programming is complete.
iii. Press the UP (+) arrow button to turn the Barrier Transmitter
on. You should notice two vertical bars indicating the Barrier
Transmitter is set to mode AB.
Note: Receiver Collars cannot be programmed to mode AB. They can only be
programmed to mode A or mode B. Receiver Collars set to mode A or mode B will
each receive the radio signal emitted by a Barrier Transmitter set to mode AB.
All manuals and user guides at all-guides.com
www.petsafe.net 11