Kaiterra Sensedge Manual De Instrucciones página 4

Sensor Modules
The Sensedge utilizes a modular design to allow for easy control and replacement of sensors. A CO
sensor is built into the core of the device, and a variety of other sensors may be inserted using the
two sensor bays on the lower side of the device.
To insert a sensor module, simply slide it into the bay, ensuring the Kaiterra logo on the aluminium
casing is facing the front of the Sensedge. When inserted correctly, the module will click into place,
and an LED light on the module's front will briefly flash.
To remove a module, gently push on the left side of it. The module will slide further into the bay,
before popping out. Do not push on the air intake of a module to remove it.
Sensors may be inserted in either sensor bay, and in any order. They may be swapped both when the
Sensedge is powered on and operational, and when the device is turned off. We recommend
inserting KM-100 on the left and KM-103 on the right across all your devices.
By default, the Sensedge is shipped with the KM-100 and KM-103 sensor modules, which together
measure PM , TVOC, temperature, and relative humidity.
2.5
Sensor Module Status Light Indications:
Steady OFF Sensor working normal
Flash once Sensor module successfully inserted
Steady ON Sensor module needs to be changed
Control
Before turning the Sensedge on for the first time, connect it to a power source using the USB
Type-C cable and adapter supplied. Upon connection to power, a battery level will be displayed on
the screen. Ensure that the battery level is above 50% before powering on for the first time.
Power on the device by holding down the power button for 10 seconds, until the Kaiterra logo
appears on the screen. Follow the instructions on the screen to set up the device.
3
Installation
The Sensedge may be used as a portable device, or mounted on a wall.
2
Important: for detailed instructions on installation, power, and connectivity setup, please visit our
support center website at https://support.kaiterra.com/sensedge or scan the QR code below.
Warranty Information
Kaiterra provides a 1-year limited manufacturer warranty on the Sensedge. To obtain a copy of the
warranty for this product, please visit https://support.kaiterra.com/policies.
Troubleshooting
For additional support, please contact your sales representative or email us
at support@kaiterra.com.
4