Publicidad
Idiomas disponibles
Idiomas disponibles
• Pull the height adjustment lever rearward to
increase the cutting height.
• Pull the height adjustment lever forward to decrease
the cutting height.
7.7
INSTALL THE BATTERY PACK
12
WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the engine stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
The machine has an automatic switch function that
lets the other battery work when the first cannot
operate.
1.
Open the battery door.
2.
Align the ribs on the battery pack with the
grooves in the battery compartment.
2
1
13
NOTE
English
3.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
4.
When you hear a click, the battery pack is
installed.
5.
Close the battery door.
The motor starts only when you put in the safety key.
7.8
REMOVE THE BATTERY PACK
1.
Remove the safety key (13).
2.
Open the battery door.
3.
Push and hold the battery release button (12).
4.
Remove the battery pack from the machine.
8
OPERATION
Wear eye protection during operation.
8.1
START THE MACHINE
1.
Make sure safety key is inserted into slot.
2.
Push and hold the start button.
3.
While you hold the start button, grab the start
handles in the direction of the handle bar.
4.
Once the machine has started, you can release
the start button.
5.
Press the Turbo button to speed up to 4,500
RPM.
Battery capacity indicator (28)
11
NOTE
WARNING
1
TURBO
2
2
EN
Publicidad
