Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2. Pull legs away from base until leg supports are fully
extended.
3. Extend tripod legs individually by releasing clamps
and adjusting to desired length. Once desired length
is achieved, position clamps to the lock position.
9.4
ADJUST THE TUBE LIGHT
To extend the area light:
1. Rotate the ring lock of extendable area light.
2. When the unlock icon is aligned with the right arrow,
the light is in unlocked state.
3. Pull the light head upwards until fully extended.
4. With the tube extended, rotate the lock ring to the
lock position.
English
9.5
ADJUST THE LIGHT HEAD
1. The light head can be adjusted up and down to 90°
and can rotate 260° .
10
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
11
STORAGE AND
MAINTENANCE
Clean the cooled lens with household window cleaner;
then wipe with a clean soft,dry cloth. Clean the
housing with a clean, dry cloth. Do not expose the light
to direct sunlight. Dry thoroughly before use. Store the
light in a dry, clean area. Avoid high humidity.
Only qualified service personnel must perform repairs.
Do not open the exterior casing of the light as
there are no-user-serviceable parts inside. Opening or
tampering with the casing may void warranty and/or
cause damage to the product or personal injury. LED
bulbs will never wear out under normal conditions and
do not need to be replaced.
8
CAUTION
CAUTION
WARNING
CAUTION
CAUTION
Publicidad
