Publicidad
Idiomas disponibles
Idiomas disponibles
P Description of parts
Please refer to the fold out page.
1 Adjustable headband
2 "L" and "R" markings
3 LED light effects
4 Microphone
5 Volume control
6 LED light effects ON/OFF switch
7 USB plug
8 Instructions for use
9 Microphone cable
10 Audio cable
11 1 to 2 adapter cable
12 3.5mm jack plug
13 Microphone ON/ OFF switch
P Technical data
Weight
(including adapter cable):
Dimensions :
Wide band characteristics
voltage (SPCV):
Current consumption
of the lighting:
Jack plug:
Operating temperature:
Operating Humidity:
Storage temperature:
Storage humidity:
Cable length:
Speaker
Driver size:
Impedance:
Sensitivity:
14 GB/IE
325 g
17 x 9 x 20 cm
105 mV +/- 10%
<100 mA
3.5 mm
+5 °C to +35 °C
40 to 85 % RH
-20 °C to +60 °C
40 to 75 % RH
approx. 2.4 m
40 mm
32 Ω ±15 %
96 dB +/- 4 dB
@ 1kHz
Frequency response:
Microphone
Sensitivity:
The specification and design may be changed
without notification.
P Before use
NOTE:
Before use, verify the package contents are
complete and undamaged!
All parts have to be unpacked and the
packaging material has to be removed
completely.
P Operation
˜ Putting on the headphones
The headphones can be adjusted to your
head size. Adjust the headband 1 so that the
headphones sit comfortably on your head.
NOTE:
The "L" (= left) and "R" (= right) markings 2
on the inside of the band are making it easier to
identify how to place the product correctly.
˜ Listening to music and using the
microphone
Connect the 3.5mm jack plug 12 with an
external audio device or mobile phone.
Switch on the external audio device or mobile
phone and set the volume to the smallest
possible setting.
Place the headphones on your head.
Adjust the volume on your audio device or
mobile phone and the product volume control
5 both to achieve your desired volume.
Position the end of the microphone 4 close to
your mouth.
Switch on the microphone switch 13 to talk.
20 Hz to 20 kHz
-42 dB +/- 3 dB
V/μbar at 1 KHz
Publicidad
