the other locking latch in the opposite side. Make sure that
both locking latches are locked. (See Fig. G1-G3)
To start the machine, set the On/Off switch to I.
To switch off the machine, set the On/Off switch to 0.
NOTE:
When the maximum filling capacity is reached, switch off
the machine immediately.
Before opening and emptying, always pull the plug from
the socket outlet.
WET VACUUMING
1. The dust bag must be removed before wet vacuuming.
2. Remove HEPA filter from the cartridge filter.(See Fig. H1)
3. Assemble foam filter with the cartridge filter. (See Fig.
H2)
4. Attach the flexible suction hose to the hose connection
piece. (See Fig. H3)
WARNING: Danger of explosion and fire! Do not
vacuum inflammable or explosive fluids; for
example, petrol, oil, alcohol, solvents. Do not vacuum hot or
burning dust. Do not operate the machine in rooms where
the danger of an explosion exists.
DRY VACUUMING
1. Remove foam filter from the cartridge filter. (See Fig. I1)
2. Assemble the HEPA filter onto the cartridge filter. (See
Fig. I2)
3. To insert the dust bag, slide the cardboard frame fully
onto the connection piece inside of the container. (See Fig.
I3, I4)
4. Attach the flexible suction hose to the hose connection
piece. (See Fig. I5)
NOTE:
The dust bag is only for dry vacuum-cleaning.
The HEPA filter is fitted before the vacuum cleaner leaves
the factory.
BLOWING DUST
Attach the flexible suction hose to the hose connection
piece. (See Fig. J1)
The tool can be use to blow dust. (See Fig. J2)
STORAGE
Store the vacuum cleaner,flexible suction hose and suction
tube indoors, especially in a cool dry location, out of reach
of children and animals. You can choose different ways to
place Flexible suction hose and Suction tube. For instance,
slot flexible suction hose or suction tube onto the vacuum
12
cleaner (See Fig. K1-K5). You can also hang the wire on the
vacuum cleaner (See Fig. K6).
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Always keep the machine clean.
To maintain the optimum performance of the machine, we
recommended cleaning the permanent filter after each use.
For this purpose, clean the permanent filter with a brush or
rinse with water.
EN