P.C. Richard & Son GENERATIONS 9751G Manual De Instrucciones página 18

INSTALL THE WALL PLATE (WP)
After you have prepared the holes for mounting the Wall Plate (WP), place the Wall Plate over
the holes and screw in the Lag Bolts (T) about half way. Use a level to make sure the Wall Plate
is level and make any necessary adjustments. Once straight, tighten all of the Lag Bolts
completely (do not over tighten!).
INSTALL THE WALL PLATE (WP)
After you have prepared the holes for mounting the Wall Plate (WP), place the Wall Plate over
the holes and screw in the Lag Bolts (T) about half way. Use a level to make sure the Wall Plate
is level and make any necessary adjustments. Once straight, tighten all of the Lag Bolts
completely (do not over tighten!).
WP
T
18