Publicidad
Idiomas disponibles
Idiomas disponibles
English
Our products are engineered to meet the
highest standards of quality, functionality and
design.
We hope you thoroughly enjoy your new
Braun appliance.
Caution
Please read the use instructions carefully
and completely before using the appliance.
• The blades are very sharp!
• Always unplug the appliance before
assembling, disassembling, cleaning or
storing.
• The appliance must be kept out of reach
of children.
• Do not hold the motor part (A) nor the gear
attachment (D1) or the upper part of the
« CA» chopper (F) under running water, nor
immerse them in water.
• Braun electric appliances meet
applicable safety standards. Repairs or
the replacement of the mains cord must
only be done by authorised service
personnel. Faulty, unqualified repair
work may cause considerable hazards
to the user.
• Before plugging into a socket, check
whether your voltage corresponds
with the voltage printed on the bottom
of the appliance.
• The appliance is constructed to process
normal household quantities.
• The mixing beaker (G) is not micro-
wave-proof.
Description
Motor part
A
On/off switch
B
Shaft with blade
C
Gear attachment (D1) for whisk (D2)
D
«HC» chopper
E
«CA» chopper
F
Mixing beaker
G
Wall mount
H
How to operate your handblender
The handblender is perfectly suited for
preparing dips, sauces, soups, mayonnaise
and baby food as well as for mixing drinks and
milkshakes.
1. Insert the motor part (A) into the shaft with
blade (C) and turn until it locks.
2. To avoid splashing, insert the hand-
blender into the vessel first, only then
press switch (B).
You can operate the handblender in the
mixing beaker (G), and just as well in any
other vessel. When blending directly in the
saucepan while cooking, take the pan from
the stove first to protect your handblender
from overheating.
Recipe example: Mayonnaise
200 – 250 ml oil
1 egg (yolk and white)
1 tbsp. lemon juice or vinegar
Salt and pepper to taste
Put all ingredients into the beaker according
to the a.m. order. Introduce the handblender
to the base of the beaker, switch it on and
keep it in this position until the oil emulsifies.
Then, without switching off, slowly move it
up and down until the mayonnaise is well
combined.
How to operate your whisk
Use the gear attachment with whisk only for
whipping cream, beating eggwhites and
mixing sponges and ready-mix desserts.
1. Insert the whisk (D2) into the gear
attachment (D1) until it locks.
5
2. Then insert the motor part (A) into the
gear attachment (D1) until it locks.
3. Insert the whisk into the vessel and only
then press switch to operate it.
For best results:
• Use a wide vessel.
• Only whip up to 400 ml chilled cream.
• Only whip up to 4 eggwhites.
• Move the whisk clockwise.
How to use your chopper
attachment
The chopper is perfectly suited for chopping
meat, cheese, onions, herbs, garlic, carrots,
walnuts, hazelnuts, almonds, prunes etc.
Pre-cut meat, cheese, onions, garlic, carrots,
chilis (see table page 3). Remove stalks and
un-shell nuts.
N.B.:
Beef: before chopping, all bones, tendons
and gristle should be removed.
Chilis (with water): only use « HC» chopper.
Do not chop ice cubes or extremely hard
food, such as nutmeg, coffee beans,
chocolate and grains.
1. Carefully remove the plastic cover from
the blade (b).
2. Caution: the blade (b) is very sharp!
Always hold it by the upper plastic part.
Place the blade on the centre pin of
the chopper bowl (c), press it down and
turn 90° until it locks. Always place the
chopper bowl (c) on the anti-slip base (d).
3. Place the food in the chopper bowl.
4. Put the upper part (a) on the chopper bowl.
5. Insert the motor part (A) in the upper part
(a) and turn until it locks.
6. Press switch (B) to operate the chopper.
During processing, hold the motor part
with one hand and the chopper with the
other.
7. First remove the motor part.
8. Then remove the upper part (a).
9. Carefully take out the blade (b).
(You may have to turn the blade slightly.)
10. Then remove the processed food from the
chopper bowl. The anti-slip base also
serves as an air-tight lid for the chopper
bowl.
Cleaning
After use, remove the shaft with blade or
the chopper. Clean the motor part (A),
the upper part of the «CA» chopper (a) and
the gear attachment (D1) with a damp cloth
only. All other parts can be cleaned in the
dishwasher. However, after processing very
salty food, you should rinse the blades of the
shaft and the chopper right away. Also, be
careful not to use in your dishwasher an
overdose of cleaner and decalcifier.
When processing foods with colour
(e.g. carrots), the plastic parts of the
appliance may become discoloured.
Wipe these parts with vegetable oil
before cleaning.
Subject to change without notice.
This product conforms to the
EMC-Requirements as laid down
by the Council Directive 89/336/EEC
and to the Low Voltage Regulation
(73/23 EEC).
Publicidad
