Publicidad
Idiomas disponibles
Idiomas disponibles
2.1. Time setting
Press
button and the hours will start to blink, then you can use
the required hour (0 ~ 23).
Press
again, and the minutes will start to blink.
Use
or
to select the minute (0 to 59);
Pressing
again, will make the date start to blink, then use
date (1-Monday, 2-Tuesday, 3-Wednesday, 4-Thursday, 5-Friday, 6-Saturday, 7-Sunday);
Finally press
to confirm and finish the setting.
If there is no pressing, the blinking will stop after 5 seconds and the setting will be finished
automatically.
2.1.1.
Temperature setting
Press
or
to set the target temperature directly and at this point the temperature
starts to blink.
Press
or
to set the target temperature.
Temperature adjustable range is from 10 ℃ ~ 35 ℃.
If no buttons are pressed, the blinking will stop after 5 seconds and the setting will be
finished automatically.
2.1.2.
Timer setting (timer mode)
Hold
for 3 seconds until the
At the same time the clock will turn to 00:00 and start to blink.
This means the timer setting starts as follows:
Press
or
to set the timer length, every button press will change half an hour (30
symbol is shown.
or
to select
or
to select the
46
Publicidad
