cecotec CONGA 2290 ULTRA HOME Manual De Instrucciones página 68

ENGLISH
The robot does not charge.
The robot does not return to the charging
base
The main brush does not spin.
The robot movements and route are unusual.
68
Check if the charging base indicators are on.
If they are not, contact the official Technical
Support Service of Cecotec.
Clean the charging terminals with a dry cloth.
Check if the robot beeps when it gets to the
charging base. Otherwise, contact the official
Technical Support Service of Cecotec.
Remove the objects 1 metre on the left and
right, and 2 metres in front of the charging
base.
The robot will return to the charging base
faster when it is near it. When it is far, it
will take more time to identify it. Clean the
charging terminals.
Clean the main brush.
Check if the main brush is installed correctly.
Carefully clean the sensors with a dry cloth.
Restart the robot. To do so, turn it off and on.