Descargar Imprimir esta página

Atlantic Loft & Luv Montana 38408158 Manual Del Usuario

Publicidad

Enlaces rápidos

Montana
TM
End Table
Item#: 38408158
Customer Service:
800-747-2660
Ver. 01 10/29/21

Publicidad

loading

Resumen de contenidos para Atlantic Loft & Luv Montana 38408158

  • Página 1 Montana End Table Item#: 38408158 Customer Service: 800-747-2660 Ver. 01 10/29/21...
  • Página 2 Assembly Tips: Become familiar with the instructions and all parts. Make sure that all parts are in the box and in good condition. Assemble the product on an open flat carton or a rug to protect the product and your floor. DOT NOT over-torque cam locks.
  • Página 3 Parts List/ Lista de Piezas Tools Needed (not included) Herramanientas requerida (no incluidas) 11 X2 M8X25MM x 10 x 10 x 24 x 12 M3.5X16MM M4X32MM x 16 x 16 M4X38MM M6X50MM M4X19MM...
  • Página 4 Insert four wooden dowels (A) each into panels (2 and 3). Inserte cuatro clavijas de madera (A) cada una en los paneles (2 y 3). Insert four CAM screws (C) into panel (6) and two CAM screws each into panels (2 and 3). Inserte cuatro tornillos CAM (C) en panel (6) y dos tornillos CAM en cada uno de los paneles (2 y 3).
  • Página 5 x 12 Attach two drawer glides (M) to panel (2) with six screws (E) using a Phillips screwdriver. Attach two drawer glides (N) to panel (3). Fije los dos deslizadores del cajón (M) al panel (2) con seis tornillos (E) con un destornillador de estrella.
  • Página 6 x 12 Attach two drawer glides (P and O) to drawer bottom (10) with six screws (E) using a Phillips screwdriver. Attach drawer pull (J) to drawer front with two screws (K). Repeat for the second drawer. Fije los dos deslizadores del cajón (P y O) al fondo del cajón (10) con seis tornillos (E) utilizando un destornillador Phillips.
  • Página 7 Slide panel (4) into slots in panels (1, 2 and 3) toward panel (1). Deslice el panel (4) en las ranuras de los paneles (1, 2 y 3) hacia el panel (1). Bottom View Vista inferior x 12 Insert top panel (6) into assembly and insert four CAM locks (B) into side panels (2 and 3). Secure CAM locks by turning each one-quarter turn with Allen wrench (L).
  • Página 8 Montana! Product Warranty Thank you for your Atlantic Inc. purchase. This Limited Warranty covers any defects in material or work- manship for purchases made in the U.S.A. and Canada, and excludes claims from conditions, malfunctions or damage not resulting from defects in material or workmanship. The warranty duration is two years.