Publicidad
Idiomas disponibles
Idiomas disponibles
K600 REMOTE CONTROL - INSTRUCTION MANUAL
RECOMMENDATIONS AND NOTES
1- Install the receptor unit at least 1 meter of the Alarms central or
electronic injection module. It is recommended to install receptor in the
trunk and the infrared emitting in the rear seat pointing to the front of the
"CD player".
2- For greater range should keep the antenna stretched and in a location
that is visual and away from the car bodywork.
3- supply the receiving unit with 12V.
4- The receptor can operate with two transmitters; for this, performing
steps 1 and 2 to the new transmitter. This feature is recommended for
customers using the Slim control on the steering wheel and a K1200 to
control by distance from the player.
UNITY
RECEIVER
UNITY
TRANSMITTER
APPROVED PRODUCT
01260-14-04318
TECHNICAL SPECIFICATIONS
Operating voltage: 9 to 16 V
Stand-by consumption: 13 mA
Reverse polarity protection: YES
Battery model: A 23 – 12 V
Operating Frequency: 433.92 MHz
Reverse polarity protection: NO
Radiated power (3 meters): 0.808 mW
Modulation: ASK
"This equipment operates on a secondary basis,have not
the right of protection against armful interference, even
of the same type of station, and notmay cause
interference to systems operating in primary basis. "
Publicidad
