K600 REMOTE CONTROL - INSTRUCTION MANUAL
ENCODING THE CONTROL
LEARN MODE:
The receiver has more than 220 models of audio and video devices stored
in its memory see the attached table or on the website: jfaeletronicos.com
Control:
1. Press the "M" key on the receiving unit (Indication 1), the action LED
will be constantly lit;
2. Press the keys on the transmitting unit (Indication 2) corresponding to
the "player" model, as shown in the table, example: If you want to
program the SONY cd, perform step 1 and then press the keys
in sequence on the control. Check that the led will ash 1 time and then 4
times, indicating that model 14 (Sony) has been programmed.
3. After completing this process, press the "M" key on the receiving unit
(Indication 1) or wait 10 seconds to exit the memory mode.
2
LED action
1