Metra 95-7399B Instrucciones De Instalación página 2

1. Open the passenger front door, then unclip
and remove the trim panel from the side
of dashboard. Remove the (1) Phillips
screw securing the silver trim panel.
(Figure A)
2. Unclip and remove the silver trim panel
that runs along the dashboard from
under the radio, and above the glovebox.
(Figure B)
3. Open the driver's door, then unclip and
remove the trim panel from the side of
the dashboard. Remove the (1) Phillips
screw securing the silver trim panel.
(Figure C)
2
DASH DISASSEMBLY
(Figure A)
(Figure B)
(Figure C)
4. Unclip and remove the silver trim panel
from under the driver's side A/C vent.
(Figure D)
5. Unclip the trim panel above the steering
column, and then unclip and remove the
entire panel surrounding the instrument
cluster. Note, these two panels are one
assembly. (Figure E)
6. Remove the (2) Phillips screws securing
the radio trim panel, then unclip and
remove the panel. (Figure F)
7. Remove the (4) Phillips screws securing
the radio and then remove.
Continue to Kit Assembly
(Figure D)
(Figure E)
(Figure F)
|
386.257.1187 MetraOnline.com