Proline KETDG Manual De Instrucciones página 6

EN
• Do not use the kettle to heat anything other than
water. Never fill the kettle beyond the maximum
level indication.
• Make sure the bottom of the kettle and the power
base are dry before placing the kettle onto the power
base.
PARTS
OPERATION
Before first use, it is recommended to operate the kettle for 2 to 3 times
following the instructions below. This will remove any dust or residues
remaining from the manufacturing process.
1. Remove kettle from power base.
2. Open the lid and fill kettle with desired amount of cold water.
Always fill the kettle between the minimum and maximum marks on
the water level window.
3. Close the lid by pressing it down until it clicks into place.
4. Place the kettle on the power base and insert the plug into the mains
socket.
5. Press the power switch. The water is being heated.
• The power indicator light will illuminate.
EN-4