Descargar Imprimir esta página

universalblue UAP1906-22 Manual De Instrucciones página 23

Ocultar thumbs Ver también para UAP1906-22:

Publicidad

Idiomas disponibles

Idiomas disponibles

and tighten the bracket properly.
See picture 07 on page 5.
• Install the complete unit in the caravan
window
and
properly.
See picture 08 on page 5.
INSTRUCTIONS FOR USE
Please consider the following indications
to optimize the operation of this air
Conditioner:
• Improve the thermal insulation of the
vehicle; In order to do so, cover any
open gaps and put reflective blinds or
curtains on the windows.
• If the vehicle has been exposed to the
sunlight for a long period: first use
the "Air circulation" mode of the air
conditioner for a while, keeping the
windows open, before selecting the
"Cooling" mode
• Avoid opening doors or windows
unnecessarily while using the "Cooling"
mode.
• Select a suitable temperature and fan
speed.
• Direct the air nozzles properly
• Make sure the air nozzles and the
intake louver are not covered with
cloths, paper or any other object.
MAINTENANCE
Caution: unplug the power cord
before cleaning the product.
Maintenance
Remove
the
rubber
condensation
drain
condensation moisture in an appropriate
place when you store the air conditioner
for a longer period of time. Then replace
the rubber seal.
See picture 10 on page 6.
tighten
the
bracket
seal
from
and
drain
To clean
• For cleaning the outside.
Wipe the outside with a damp cloth. They
dry the device thoroughly with a dry cloth.
Do not allow water or deterrent to enter the
machine. Do not clean the air conditioner
with an aggressive cleaning agent and/or
pertrol.
• Clean filter.
It is important to regularly remove the dust
from the filter. Remove the filter as shown
in the picture below. Clean the filter with
tap water and / or a vacuum cleaner to
remove any dirty from the filter. Make sure
the filter has dried before putting it back in
the air conditioner. Do not use water hotter
than 40°C for cleaning and do not expose
the filter to the sun.
See picture 09 on page 5.
Storage
• Remove the unit from the window.
See picture 11 on page 6.
• Remove the rubber seal from the indoor
unit, drain the condensate water.
• Keep running in fan mode to make the
internal dry.
• Turn off the conditioner and pull down
the plug.
• Wash the filter then install;
• Tear down the accessories and store.
• Store the air conditioner in a cool
and dry place. We recommend that
you put the air conditioner back in
its packaging when you store it. This
prevents dirt and dust from collecting
on the air conditioner.
See picture 12 on page 6.
ERROR CODE
the
• If the device does not work or works
the
insufficiently:
Check if an error code is visible in the
display, refer to the code table for a solution.
If no error code is visible in the display,
go through the error table for a possible
solution.
See table 03 on page 8.
EN
23

Publicidad

loading