Publicidad
Idiomas disponibles
Idiomas disponibles
To add a command
Adding a command at the end of an existing list
1.
Starting from the Main screen:
– press the key "Menu" (F1)
~
– press the
key until the option "Modify params" is followed by
a horizontal arrow
– press the tabulator key to activate the menu
~
2.
Use the
key to scroll until the option "Clock function" is followed
by a horizontal arrow. Press the tabulator key, following screen
appears:
Clock Function
Not activated
Menu
Mod
F1
F2
Suppose the command to stop the dryer at 18:00 must be added
to the list of Monday:
– 06:15 start
3.
Press the tabulator key, following screen appears:
Monday
Tuesday
Wednesday
Menu
Mod
F1
F2
4.
Scroll through the display until "Monday" is followed by a
horizontal arrow. Press the tabulator key. Scroll through the dryer
start/stop commands until the first empty command line is
indicated by the horizontal arrow on the screen.
5.
Press the key "Mod", the first two digits of the command start
blinking. Enter "18:00 stop" using the scroll keys
a field and the tabulator key to jump from one field to another.
6.
Press the key "Prog" to program the new command or the key
"Canc" to quit without reprogramming.
2904 0177 04
}
Del
F3
}
~
Del
F3
|
~
or
to modify
Adding a command between two existing commands
1.
The regulator does not allow to enter a new command which is
situated timewise before the last command in the list.
2.
Scroll through the display until the command before which the
new command must be entered is followed by the horizontal
arrow and press the key "Mod". Change this command to the
new command and press the "Prog". Press the
last command of the list and press the key "Prog".
To delete commands
1.
Starting from the Main screen:
– press the key "Menu" (F1)
~
– press the
key until the option "Modify params" is followed by
a horizontal arrow
– press the tabulator key to activate the menu
~
2.
Use the
key to scroll until the option "Clock function" is followed
by a horizontal arrow. Press the tabulator key, following screen
appears:
Clock Function
Not activated
Menu
Mod
F1
F2
Deleting all commands
Press the key "Del" (F3) in the screen above. A question to confirm
the deleting operation will appear.
Deleting all commands related to a specific day
Scroll through the display until the desired day is followed by a
horizontal arrow. Press the key "Del" (F3). A question to confirm the
deleting operation will appear.
Deleting a specific start/stop command
Scroll through the display until the desired start or stop command line
is followed by a horizontal arrow. Press the key "Del" (F3). A question
to confirm the deleting operation will appear.
I
NSTRUCTION MANUAL
~
key, add the
}
Del
F3
9
Publicidad
