Uline H-5714 Manual Del Usuario página 3

7. Embed four long camlock pins in each of the two
top box panels with plastic inserts, and connect to
the other two top box panels to form a box stand.
Embed the remaining provided camlocks into the
open holes of each panel. Insert screwdriver into the
appropriate eight embedded camlocks and turn
clockwise to secure panels together. (See Figure 7)
8. Set the top box stand on top of the four long
camlock pins on the middle table. Insert screwdriver
into the remaining four embedded camlocks at the
bottom and turn clockwise to secure box stand to
the table. (See Figure 8)
PAGE 3 OF 9
ASSEMBLY CONTINUED
9. Embed four short camlock pins to the bottom of the
Figure 7
Figure 8
1-800-295-5510
uline.com
top table, and set on top of the top box stand. Turn
the four outside screws clockwise to secure the top
table. (See Figure 9)
Figure 9
0621 IH-5714