Commercial Electric SHOP3/840/MOT/SOL/HD Guía De Uso Y Cuidado página 8

Motion Sensor
IDEAL FOR USE IN PLACES WHERE YOU DON'T WANT TO LOOK
FOR THE LIGHT SWITCH: GARAGE, WORKSHOP, LAUNDRY
ROOM, OR SHED.
WALKING STRAIGHT
Walking straight towards sensor, detection from sensor is approximately 5 ft.
TOP VIEW
MOTION
DETECTION
AREA
WALKING ACROSS
Walking across sensor at an angle, detection from sensor is approximately 8 ft.
TOP VIEW
MOTION
DETECTION
AREA
To turn light on when entering a dark room
Mount unit as close to entrance as possible. For best results, mount
where sensor is within six feet from the entrance (room must be
dark). When selecting a location for the shop light, temporarily hang
it near the entrance to make sure motion sensor is working properly
from that location. If not, adjust the shop light position.
Motion Sensor
MOTION
DETECTION
AREA
5 ft.
APPROXIMATE
DIAMETER 10 FT.
Detection Distance
8
NOTE: Motion sensor will turn light on. As
long as motion continues, light will stay on.
NOTE: Motion detection works best
when walking across sensor at an angle.
MOTION DETECTED
FROM SENSOR
ALL DISTANCES ARE MEASURED
FROM MOTION SENSOR NOT
FROM FIXTURE.
5 ft.
MOTION
DETECTION
AREA
8 ft.
APPROXIMATE
DIAMETER 16 FT.
Detection Distance
MOTION DETECTED
FROM SENSOR
8 ft.