Publicidad
Idiomas disponibles
Idiomas disponibles
Linking the Device to
Smartmi Link
This product has been linked to the
Smartmi Link and can be controlled
using the app.
Scan the QR code or search for
"Smartmi Link" on the app store to
download and install the app. Go
to the app's homepage, click "+" in
the middle of the page, then add the
device as prompted.
Note:
Please ensure that your Wi-Fi network is both
available and has Internet access. Place your
phone as close to this product as possible. (This
product does not support 5G networks)
This product will be listed as "Jya Fjord Pro Air
Purifier " in the app's device listing.
* If you need more detailed instruction, please visit:
https://www.smartmiglobal.com/pages/helpcenter
Intelligent Control with Apple HomeKit
1
Open the Home app on your iPhone/iPad.
2
Tap "Add Accessory" and then scan the HomeKit setup code on the
product sticker (two stickers on the device unit, see illustration), or enter the
eight-digit setup code above the HomeKit Setup Code. The device will then
be linked to the Apple Home app.
The device can be linked to
Smartmi Link after linking to
HomeKit. Go to the Personal
Info page on Smartmi Link.
Tap "HomeKit Info" and then
link the HomeKit device as
prompted.
Devices linked to Smartmi Link
can also be added to HomeKit.
Go to the Device Control page
on Smartmi Link. Tap "Add
to HomeKit" in "Settings" and
then link the device to HomeKit
as prompted.
Note:
Please ensure that your Wi-Fi network is both
available and has Internet access. Place your
phone as close to this product as possible.
(This product does not support 5G networks).
To control this accessory which is compatible
with HomeKit, it is recommended to use iOS
13.0 or a later version.
Please keep the HomeKit setup code, as you
will need to scan the code to link the device to
HomeKit after a factory reset.
iPad and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Controlling this HomeKit-enabled accessory
automatically and away from home requires a
HomePod, Apple TV, or iPad set up as a home
hub. It is recommended that you update to the
latest software and operating system.
HomeKit Setup Code
10
Publicidad
