Publicidad
Idiomas disponibles
Idiomas disponibles
11
Care & Maintenance
Warning: Make sure the purifier is turned off and
unplugged before performing the following operations.
Cleaning the filter compartment
To ensure optimal ventilation and
purification, use a vacuum cleaner to
remove any dust from the air inlets and
the filter compartment, or wipe these
areas gently with a soft cloth.
Note: To avoid damaging the purifier, do not rinse
or spray the filter compartment directly with water,
or wipe it with a soaking wet cloth.
Cleaning the laser particle sensor
Use a non-sharp tool to open the cover
of the laser particle sensor, then use an
air blow gun or hair dryer to clean the
filter on the cover and the sensor, as
illustrated in the figure.
Note: Do not use hot air.
Publicidad
