Publicidad
Idiomas disponibles
Idiomas disponibles
9. Assemble the wheels on the base with M6X12 screwsx4pcs and M6 nutsx4pcs (pre-
assembled on the wheels).
10. Fix 3 side panels (15) by the screw (17).
Note: Don't cove the side where the control knob is.
11. Screw the handle (18) onto the front panel (16), attached
the connector (12) back the front panel, screw them with
2pcs M4X8 bolts, hook the chain (19) to the hole in control
box, then Close panel to the middle plate, the panel is
attracted by the magnets.
Tips: the chain can hold the panel while operating the control
45
Completed
Publicidad
