Receive A Call - JVC KD-X352BT Manual De Instrucciones

BLUETOOTH®
Auto Pairing
When you connect the iPhone/iPod touch/
Android device to the USB input terminal,
pairing request (via Bluetooth) is automatically
activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is
turned on.
– [AUTO PAIRING] is set to [ON]. ( 14)
– JVC MUSIC PLAY application is installed on
the Android device ( 7) and [AUTO MODE] is
selected ( 8).
BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:
• The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. ( 12)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 12)
During a call:
• The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To
First incoming call...
Answer a call
Reject a call
End a call
While talking on the first incoming call...
Answer another incoming call
and hold the current call
Reject another incoming call
On the faceplate
Press or the volume knob.
Press and hold or the volume knob.
Press and hold or the volume knob.
Press or the volume knob.
Press and hold or the volume knob.
11
ENGLISH