Publicidad
Idiomas disponibles
Idiomas disponibles
3. Use the included socket wrench to remove the blade gear
from the blade bolt. At this point, the blade bolt, cutting
blade and rack should come off the pruner (Figs. 23 - 24).
Fig. 23
Blade
gear
Fig. 24
Pinion
Blade bolt
Rack
4. Fit the new cutting blade and the rack on the pruner. Then,
reinstall the blade bolt and blade gear to secure them in
place (Fig. 24).
NOTE: When reinstalling the rack, make sure the gear
teeth are in contact with the pinion.
5. Reattach the blade cover and the two screws.
Storage
• Store the tool in a secure and dry location. The storage
temperature must always remain between 41°F (5°C) to
104°F (40°C).
• Remove the battery from the compartment.
• Clean the product as described above.
• Fit the blade sheath over the blades (Fig. 25).
Socket
wrench
Blade
gear
Cutting blade
Fig. 25
• Fully recharge the battery before using the tool after
prolonged storage.
Disposal
• Do not dispose of electrical tools as unsorted municipal
waste. Use separate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical tools are disposed of in landfills or dumps,
hazardous substances can leak into the groundwater and
get into the food chain, damaging your and others' health
and wellbeing.
Recycling + Disposal
The product comes in a package that protects it against
damage during shipping. Keep the package until you are
sure that all parts have been delivered and the product is
functioning properly. Recycle the package afterwards or keep
it for long-term storage.
WEEE symbol. Waste electrical products should not
be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority
or local store for recycling regulations.
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
m
CAUTION!
Even discharged battery packs contain
some energy. Before disposing, use electrical tape to cover
the terminals to prevent the battery pack from shorting, which
could cause a fire or explosion.
m
WARNING!
To reduce the risk of injury or explosion,
never burn or incinerate a battery pack even if it is damaged,
dead or completely discharged. When burned, toxic fumes and
materials are emitted into the surrounding atmosphere.
• Batteries vary according to device. Consult your manual
for specific information.
• Install only new batteries of the same type in your product
(where applicable).
11
Blade sheath
Publicidad
