SNOWJOE sunjoe 24V-PRN1-LTE Manual Del Operador página 6

Unpacking
Carton Contents
• Pruner
• Removable battery compartment
• Blade cover
• Hex key
• Socket wrench
• iON+ 24V lithium-ion battery
• iON+ 24V lithium-ion battery charger
• Manual with registration card
1. Carefully remove the cordless pruner and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe ® + Sun Joe
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
pruner. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suffocation
risk!
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
Lights Light Indicators
Charge level button
The battery is at 30% capacity
The battery is at 60% capacity
The battery is fully charged
® customer service center at
NOTE: If the charge level button does not appear to be
working, insert the charger and charge as needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells "recover" some of their
charge after resting.
m
WARNING!
Charge only Sun Joe
battery pack with its compatible Sun Joe
ion charger. Other types of batteries may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
Charging the Battery
1. Check that the mains voltage is the same as that marked
on the rating label of the battery charger. Then, plug the
battery charger into an AC power outlet. Insert the charger
plug into the charging socket of the battery to begin
charging (Fig. 1).
Fig. 1
LEDs
2. Remove the battery once fully charged.
m
CAUTION!
FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet first, then disconnect the charger from the battery.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Assembly
This cordless pruner comes completely assembled with the
blade preinstalled.
m
CAUTION!
Ensure the battery is not inserted and the
blades are covered by the sheath before assembly.
6
® 24V iON+ lithium-ion
®
24V iON+ lithium-