KingSmith TRMC21F Manual Del Usuario página 8

4. How to use the treadmill
1. Mode description
Standby mode
The standby mode light is on, and the motor
and sensor stop responding.
Manual mode
The manual mode light is on, and the
movement speed is controlled by the
remote control or APP.
Auto mode
The auto mode light is on, and the
speed is automatically controlled
through intelligent algorithms.
* The equipment system will be regularly
upgraded and optimized, and some
operations may be adjusted.
09
2. Standby mode control instructions
Standby mode
In standby mode, you can short press the mode button on the
remote control to active the treadmill and switch to the default
manual mode.
When the treadmill is not in running state, long press the mode
button on the remote control to switch to the standby state.
Remote control legend
Short press: mode switch
Long press: switch to standby mode
(non-running state).
3. Manual mode control instructions (Beginner mode)
Manual mode
In this mode, the remote control can be used to control the treadmill. It is recommended that beginners use the manual mode
first, and then use the automatic mode after proficiency in using the treadmill.
acceleration button
hort press: speed increase by 0.5km/h
function button
short press: start or stop the treadmill
deceleration button
short press: speed decrease
by 0.5km/h
mode button
Short press: mode switch; Long press: switch to standby mode
(non-running state)
10