KEY OPERATION
!CAUTION BEFORE OPERATING YOUR E-SCOOTER, MAKE SURE THAT THE THROTTLE GRIP
IS NOT ROTATED TO THE "ON" POSITION!!! MAKE ALSO SURE THAT YOUR THROTTLE IS NOT
"STICKY" AND ROTATES FREELY BACK TO THE INITIAL POSSITION SEE PICTURE FOR
CORRECT PLACEMENT OF LEVER BEFORE USAGE!!!
CONTROL SWITCHES
The Mobility Scooter uses a speed changing throttle grip. It is on the right side of the
handlebar. Rotate the throttle grip toward the seat to accelerate and rotate forward away from
the seat to slow down.
It is suggested after acceleration to turn back 1/4 turn the throttle. This will increase your
range and increase your battery life.
ON/OFF/LOCK Switch: (ignition)
1. E-SCOOTER is ON. Turn it ON only when you are
ready to go. Turn it OFF when you are not riding and
remove key.
2. E-SCOOTER is OFF. Turn it OFF when not in use to
preserve the battery. The key can be removed.
3. Push the key and turn from position "2" to position
"4" to lock the handlebar.
4. Handlebar is locked. The key also can be removed.
control switches
and throttle
- 13 -