Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Condition
When
1. No any light
I turn my
Indications on the
Vehicle
display.
on
nothing
happens.
2.Power indication
light is on
3.Power indication
light is on and the
break light is "on".
The Throttle
1. The Throttle
does not
does not return to
work or
stop position.
switch on,
the vehicle
moves
without
acceleration.
The range is
Charger light is off
low
Battery doesn't
hold the charge
The breaks
1. Break levers go
are not
too deep
working
2. No breaking
properly
power
Check
1. Check the main
breaker under the
seat if it is on "ON"
position.
2. Check power
Connection and
battery level.
3.Check battery and
motor connection
4. Check the break
levers if they return to
normal position.
5. Battery voltage is
too low.
1. Check the grip for
damage
2. Check the Throttle
spring.
3.The Throttle handle
if it is loose
1. Bad connection
between the charger
and the battery.
2. Charger doesn't
charge
1.Connections
between the batteries
are not good
2. Bad battery cell
1.Needs adjustment
2. Break pads are
dirty or need
replacement
- 25 -
Solution
1. Flip the breaker lever on
"ON"
2. Fasten connections.
3. Clean and fasten battery
terminal connectors.
4. Fasten the motor
connections With the
controller under seat
5. Loosen the break. If there
is any corrosion replace.
Contact the supplier.
6. Charge or replace
battery. Contact the
supplier.
1.Use a flat head screwdriver
to adjust the gap between the
rubber handle and the cover.
2. Readjust the Throttle
spring position. Contact
the supplier
3. Check Throttle
connections.Contact the
supplier.
1. Check the charger
plug position.
2. Replace the charger
1.Check all connections
between the batteries
2. Replace the bad
battery cell
1. Adjust the break cable –
see instructions
2. Clean break pads using
sand paper or replace
Publicidad
