FAULT DIAGNOSIS
Do not use side brush in a room without mop
TROUBLE
Transport Slider is in
DOWN position.
Circuit breaker has tripped.
Machine fails to start
Transport wheels not
raising off of the ground
when handle lowered.
voltage / electrical supply.
Incorrectly fitted /
damaged recovery tank.
Machine fails to pick up
Worn brushes.
water from the floor.
Drum not rotating.
Debris around drum or base
Drum not rotating.
of machine.
Drum is rotating, but
Debris around brushes.
brushes are not.
Faulty pump.
Improper water hose
Machine fails to spray
connection.
solution onto the floor.
Solution tank empty.
Clogged jet.
Blocked filter or faulty
valve in solution tank.
Motor makes a humming
Debris around drum and
noise but does not turn.
base of machine.
boards. Walls will get dirty.
REASON
REMEDY
Move Transport Slider to
the working (UP) position.
Remove any obstruction
to the brush/drum. Wait
1 minute and reset the
circuit breaker.
Check for debris and
clean machine.
Lack of
Check power cord, plug,
and socket outlet.
Refit or replace
recovery tank.
Check brush pressure.
Replace brushes if needed.
See below.
Clean drum and base
of machine.
Clean drum and base of
the machine.
If there is no noise present
from the pump, check
that the pump cable is
fitted correctly.
Check the quick lock
connector for proper fitting.
Fill solution tank.
Clean jet.
Clean / replace filter
or valve.
Clean drum and base
of machine.
Serial Number:
Purchase Date:
Dealer:
Phone Number:
26
Tornado Industries, LLC
3101 Wichita Court
Ft. Worth, TX 76140-1755
Phone: 800-VACUUMS
Fax: 1-817-551-0719
WWW.TORNADOVAC.COM
Record of Purchase
T-OM-VOR18 04/2022