EN
3.3.2.Manual adjustment of the lower end limit and automatic adjustment of
the upper end limit
1] Position the motorised product at its half-way position.
2] Press the Down button: the motorised product lowers.
3] Press the my to stop the motorised product at the lower end limit position (if
necessary, adjust the position of the motorised product using the Up or
Down buttons).
4] Press the my and Up buttons simultaneously: the motorised product raises.
5] Press the my to stop the motorised product.
6] Press the my until the motorised product moves up and down briefly to
validate the lower end limit setting.
NOTICE
After pressing the my button, the upper end limit is adjusted automatically.
3.3.3.Manual adjustment of the lower end limit and automatic adjustment of
the upper end limit with automatic catching system
NOTICE
The catching system at the lower end limit may vary depending on the motorised
product, but the procedure for setting the entrance/exit positions of the catches
remains the same on all systems.
1] Position the motorised product at its half-way position.
2] Press and hold the Up and Down buttons simultaneously for 5 seconds: the
motorised product performs a slower up and down movement.
3] Press the Down button: the motorised product lowers.
4] Press the my button to stop the product at position (P1), which corresponds
to the automatic catching system's entrance point.
5] Press the my and Up buttons simultaneously: the motorised product raises
and stops, putting tension on the fabric.
6] Press the Down button: the motorised product lowers.
7] Press the my button to stop the motorised product at position (P2), which
corresponds to the automatic catching system's exit point.
8] Press the my button until the motorised product moves up and down briefly
to validate the end limit setting.
8
PERGOLA 50 io RGS
1]
3]
5]
1]
2]
5 s
3]
4]
5]
6]
7]
8]
©
Copyright
2022 SOMFY ACTIVITES SA. All rights reserved.
PERGOLA 60 io RGS
2]
4]
6]