Descargar Imprimir esta página

METRO PROFESSIONAL MAKRO PROFESSIONAL GPM1020P Traducción De Las Instrucciones Originales página 14

Ocultar thumbs Ver también para MAKRO PROFESSIONAL GPM1020P:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28
24. If the power cord should
overheat, stop using the
appliance and disconnect the
appliance from the electrical
GB
outlet.
25. Make sure that the appliance
and all accessories are dry
before connecting it to the
power supply, installing
accessories and before
storage.
26. Connect the mains plug to an
easily accessible socket, in
order to quickly disconnect
the appliance from the mains
supply in an emergency. Pull
the mains plug out of the
socket in order to disconnect
the appliance completely.
Use the mains plug as a
disconnection device.
27. Danger of injury! Never use
the appliance with an open
safety guard. Do not try to
remove the safety guard.
28. The appliance can hold a
maximum of 8 kg (GPM1020P)
/ 3.2 kg (GPM1010) of
processed products. Do not
overfill the appliance to prevent
ingredients from overflowing
or from being discharged
uncontrollably.
29. Only operate the appliance
with the accessory and
bowl securely attached. A
loose element will move
uncontrollably and may lead to
personal injury or damage to
the appliance.
30. Caution! The appliance is
very heavy. Only carry it with
two or more people. Take good
care while carrying and placing
it to avoid injury to hands or
feet.
31. Consult local and national
standards to comply with the
following:
− Health and safety at work
legislation
− EN codes of practice
− Fire precautions
− Wiring regulations
− Building regulations
32. Always stand behind the
safety guard when operating
the appliance.
33. Do not remove food from the
appliance until the accessory
has come to a complete stop.
34. Do not use the appliance with
a damaged accessory.
35. Do not bypass the safety
interlocks.
36. Never leave the appliance
unattended when in use.
37. The value of the overcurrent
protective device is 8A.
38. The noise emission values
have been obtained according
to standard NEN-EN 454 and
to basic standard EN ISO
3746.
- 13 -

Publicidad

loading

Este manual también es adecuado para:

Makro professional gpm1010